Chevy Hardcore just put out a feature on some of our Customer Rides. Congratulations to James Montigny, Mike Lemek and Jeff Moyer for getting some press! The cool thing is they also linked to our Facebook page so readers can peruse all of the Customer Rides pictures we have posted so everyone who has submitted their ride pictures to us got some major traffic.

If you’re a Spohn Performance customer and you want to get pictures of your car in front of tens of thousands of hardcore enthusiasts then please submit them by sending an email to rides@spohn.net. All Customer Rides pictures we receive are posted to the Customer Rides section of our website and to our Facebook page. These areas both receive thousands of unique visits each and every week! And as you can see by this article, the automotive press keeps an eye out on these places as well. So what are you waiting for? Send your ride pictures to rides@spohn.net.

We want your videos too, all videos submitted are featured on SpohnTV, our YouTube channel, our StreetFire channel and on our Facebook page. Just go to SpohnTV and you can upload your videos right through our interface!

Spohn Performance Chevy Hardcore.com Firebird

Whenever we see a car pull off a wicked wheelie, we always find ourselves marveling at the big bombastic engine or the thick meaty tries. To really pull those wheelies off safely though requires a serious suspension setup. The guys over at Spohn performance know this to be true, and their products certainly see plenty of action.

Don’t believe us? Head over to their Facebook page where they have posted up a bunch of pictures from users (and believers) in Spohn’s performance suspension products.

The car that initially got our attention was this 1993 Firehawk, owned by James Montigny of Missouri. A factory classic, this mean machine was upgraded with Spohn’s solid front sway bar, rear anti-roll bar, LT1 K-member and an adjustable torque arm. All told this badboy gets down the ¼ mile in just 11.92 seconds @ 113 mph.

Spohn Performance Chevy Hardcore.com Camaro

That is just a warm-up though. Mike Lemek has a nitrous-injected 632 cubic-inch V8 engine in his third-gen Camaro that runs 8.0’s in the ¼ mile. He uses a complete Spohn front and rear performance suspension. This car can get pretty high, but there are better still.

Spohn Performance Chevy Hardcore.com Camaro Wheelie

This is the best wheelie yet, courtesy of Jeff Moyer of Pennsylvania. His 8-second nitrous-injected ’85 Camaro also runs in the 8’s. He credits his bevy of Spohn performance suspension products, including an anti-roll sway bar, rear control arms, and a Pro-Drag front coil-over kit.

These are just a few of the many rides occupying Spohn’s Facebook page, so take some time and check out all the cool cars they’ve help keep straight and true down the drag strip.

.


Suburban Panhard Bar Tahoe Panhard Bar

Application:

2000-2006 Chevrolet Suburban 1500 & 2500
2000-2006 Chevrolet Tahoe
2000-2006 GMC Yukon
2000-2006 Chevrolet Avalanche
2000-2006 Cadillac Escalade
2000-2009 Hummer H2

Visit the product page

Replace the factory’s weak, stamped steel, flexible panhard bar with one of our heavy duty set-ups! Allows for centering the rear end after lowering. The best component for serious handling and towing performance. Allows for lateral alignment of the rear end for clearance when running larger tires and greatly increases the rear end’s lateral stability.

Specifications:

  • 1.25″ x .095″ DOM tubing
  • Stronger, yet lighter than stock
  • Polyurethane bushings (fluted) with grease fittings for easy lubrication
  • Right hand and left hand threaded CNC machined 4140 chrome moly double male stud adjuster threads into 4130N chrome moly TIG welded threaded tube adapters
  • Reuses OEM mounting hardware, no need to drill out your truck’s mounting brackets
  • This is the highest quality, easiest to adjust on the truck panhard bar on the market!
  • Available powder coated in your choice of bright red or gloss black for a brilliant and durable finish

.


Suburban Rear Control Arms Tahoe Rear Control Arms

Application:

2000-2006 Chevrolet Suburban 1500 & 2500
2000-2006 Chevrolet Tahoe
2000-2006 GMC Yukon
2000-2006 Chevrolet Avalanche
2000-2006 Cadillac Escalade
2000-2009 Hummer H2

Visit the product page

Our boxed rear lower control arms outperform the flexible, stamped-steel arms and soft rubber bushings that come from the factory. Eliminate wheelhop, get more stable towing performance and increase traction with an easy bolt on installation. All ends are fitted with grease fittings for easy lubrication of the fluted polyurethane bushings. Available powder coated in your choice of bright red or gloss black for a brilliant and durable finish.

Our boxed rear lower control arms are constructed from 2.0″ x 1.5″ x .120″ wall rectangular tubing, and are 100% TIG welded for the ultimate in strength and appearance.

.


Adjustable Front Track Bar for Dodge Ram 4x4

Adjustable Front Track Bar for the 1994-2002 Dodge Ram 4×4

1994-2001 Dodge Ram 1500 4×4 | 1994-2002 Dodge Ram 2500 & 3500 4×4

SKU#D94-02-TB

Dodge Ram trucks that can’t hold a straight line are tiring to drive and just plain dangerous. The OEM front track bar on the 1994-2002 Dodge Ram 1500, 2500 and 3500 4×4 is a notorious weak link in the front suspension, often failing after only a few thousand miles. If your Dodge Ram 4×4 suffers from steering wander, poor road feel or follows the road crown aggressively, a stronger and more durable track bar assembly from Spohn Performance is what you need.

If your truck is lifted, the OEM track bar probably shifted your front axle about 1/2″ to the driver’s side. The Spohn Performance adjustable front track bar will allow you to center the front axle on trucks with up to a 4″ lift.

Build Specifications:

  • 1.25″ x .120″ DOM tubing
  • 4130 Chrome moly threaded tube adapters TIG welded in place
  • 3/4″ Chrome moly teflon lined extreme duty spherical rod end on the axle end
  • Fluted and greaseable polyurethane bushings on the frame end
  • CNC laser cut 1/4″ steel bolt in upper mounting bracket
  • Includes all required mounting hardware
  • Double adjustable for easy “on the truck” adjustments
  • Power coated in your choice of bright red or gloss black for a brilliant and durable finish

Front Lower Control Arms Dodge Ram 4x4
Front Lower Control Arms for the 1994-2002 Dodge Ram 4×4

SKU #D94-99-202 - 1994-1999 Dodge Ram 4×4 1500, 2500, 3500
SKU #D00-02-202 - 2000-2002 Dodge Ram 4×4 1500, 2500, 3500

The Spohn Performance boxed front lower control arms for the 1994-2002 Dodge Ram 4×4 outperform the flexible, stamped steel control arms and soft rubber bushings that come from the factory. Eliminate wheel hop, steering wander and increase traction with an easy bolt on installation. All ends are fitted with grease fittings for easy lubrication of the fluted polyurethane bushings. Available powder coated in your choice of bright red or gloss black for an attractive and durable finish.

Our boxed front lower control arms are constructed from 2.00″ x 1.50″ x .120″ wall rectangular mild steel tubing, and are 100% TIG welded for the ultimate in strength and appearance. These front lower control arms are built with an offset to provide maximum tire clearance. When running larger tires they can rub against the stock control arms at full steering lock, our offset design eliminates this problem!

Front Mounting Hardware Included: We have yet to put these on a truck that we did not have to cut off the front mounting bolts. Due to the design of the factory’s front mounting bolts, water can enter through the side of the bolt causing it to rust fast to the bolt sleeve inside of the factory’s front bushing. You have your truck tore apart and then have to take a trip to the Dodge dealer, find and order the bolts you need and then wait a few days for them to come in! Since we already know you will need new front bolts, this front lower control arm packageincludes two new factory bolts, two factory cam washers and two new lock nuts. Remember that when looking at our price!

Front Upper Control Arms Dodge Ram 4x4
Front Upper Control Arms for the 1994-2002 Dodge Ram 4×4

SKU #D94-99-602 - 1994-1999 Dodge Ram 4×4 1500, 2500, 3500
SKU # D00-02-602 - 2000-2002 Dodge Ram 4×4 1500, 2500, 3500

The Spohn Performance boxed front upper control arms for the 1994-2002 Dodge Ram 4×4 outperform the flexible, stamped steel control arms and soft rubber bushings that come from the factory. Eliminate wheel hop, steering wander and increase traction with an easy bolt on installation. All ends are fitted with grease fittings for easy lubrication of the fluted polyurethane bushings. Available powder coated in your choice of bright red or gloss black for an attractive and durable finish.

Our boxed front upper control arms are constructed from 2.00″ x 1.50″ x .120″ wall rectangular mild steel tubing, and are 100% TIG welded for the ultimate in strength and appearance.

Dodge Ram Front Track Bar Installed

Dodge Ram Front Upper & Lower Control Arms Installed

See all of our Dodge Ram 4×4 Suspension Parts at the following links:

1994-1999 Dodge Ram 4×4 1500, 2500, 3500 Suspension Parts
2000-2002 Dodge Ram 4×4 1500, 2500, 3500 Suspension Parts

.