H-Body Vega Monza Panhard Bar Review
CosworthVega.com recently did a review of our Panhard Bars for the 1975-1980 GM H-Body in their latest edition of Cosworth Vega Magazine. You can read the article embedded below or click here to view it on their website.


Ford Torino & Ranchero Rear Upper Control Arms

Tubular Rear Upper Control Arms | 1972-1976 Ford Torino & Ranchero

SKU# FT-607 (Product Page Link)

Our tubular rear upper control arms for the 1972-1976 Ford Torino and Ranchero outperform the flexible and soft rubber bushings that come from the factory. Eliminate wheel hop and increase traction with an easy bolt on installation!

All of the ends are fitted with grease fittings for easy lubrication and they’re available powder coated in your choice of bright red or gloss black for a brilliant and durable finish.

Build Specifications: 

  • 1.00″ x .095″ wall DOM tubing formed to the shape of the OEM control arms for a 100% bolt in installation
  • Stronger, yet over three pounds lighter than stock
  • 3/4″ Del-Sphere pivot joints on the rear ends equipped with grease fittings for easy lubrication
  • CNC machined through sleeve and silver zinc plated steel spacers keep the Del-Sphere ends perfectly centered inside of the mounting brackets
  • Polyurethane bushed (fluted) ends on the front ends equipped with grease fittings for easy lubrication
  • Re-uses OEM mounting hardware, no need to drill out your car’s mounting brackets
  • Available powder coated in your choice of bright red or gloss black for a brilliant and durable finish

These combo ended control arms will wipe out most bind, yet keep the road noise increase minimal for a street driven car. The Del-Sphere pivot joints provide for “bind-free” handling performance.

The fluted polyurethane bushed ends are mounted onto the chassis (floor) mount for maximum road noise insulation.

Check out all of our performance suspension components for the 1972-1976 Ford Torino and Ranchero by clicking here.


Ford Torino & Ranchero Adjustable Rear Lower Control Arms

Adjustable Rear Lower Control Arms | 1972-1976 Ford Torino & Ranchero

SKU# FT-205 (Product Page Link)

Our adjustable tubular rear lower control arms for the 1972-1976 Ford Torino and Ranchero outperform the flexible stamped steel control arms with soft rubber bushings that come from the factory. Eliminate wheel hop and increase traction with an easy bolt on installation!

The adjustability feature allows for setting the pinion angle. The factory utilized an eccentric bolt that allowed for only 1 degree of pinion angle adjustment. If you replace your worn out factory bushings with new aftermarket rubber or polyurethane bushings they do not offer the eccentric adjustment.

Our right hand and left hand threaded control arms allow for easy on-car adjustments, no need to unmount the control arms to make adjustments!

Build Specifications: 

  • 1.25″ x .095″ wall DOM tubing
  • Stronger, yet over two pounds lighter than stock
  • 3/4″ Del-Sphere pivot joints with grease fittings for easy lubrication
  • Right hand and left hand 4130 chrome moly threaded ends with wrench flats allow for easy on-car adjustment – Ship jig set at OEM length
  • CNC machined through sleeve and silver zinc plated steel spacers keep the Del-Sphere ends perfectly centered inside of the mounting brackets
  • Re-uses OEM mounting hardware, no need to drill out your car’s mounting brackets
  • 100% bolt in installation
  • Available powder coated in your choice of bright red or gloss black for a brilliant and durable finish

Check out all of our performance suspension components for the 1972-1976 Ford Torino and Ranchero by clicking here.