Extended Length Polyurethane Rear Bump Stops
2009-2012 Dodge Ram 1500 4×2 & 4×4
If you have a 2009+ Dodge Ram 1500 4×2 or 4×4 truck and you have lowered the ride height and/or you use your truck for hauling or towing then you need to install extended length rear suspension bump stops.
When the ride height is lowered via air bags, lowering springs or by a heavy load the factory rear bump stops will not properly stop the compression of the rear coil springs before they allow the truck to lay down onto the rear control arms. When this happens it will bend the rear control arms and/or deform and crack the rear control arm bushings.
Our extended length polyurethane rear bump stops will prevent this from happening. They’re an easy 100% bolt in replacement of the factory rear suspension bump stops. Their extended length will stop the rear suspension compression before any rear control arm damage can occur.
These extended length rear suspension bump stops ARE A MUST (not optional) if you are lowered or use your truck for hauling heavy loads and/or towing.
Check out all of our performance suspension components for the 2009+ Dodge Ram 1500 4×2 and 4×4 trucks by clicking here.