Spohn Performance | Support Center

Ordering A Rear End - The Master FAQ List


This article is a master list of links that will answer any question you may have about ordering a new aftermarket rear end. If you still have questions after reviewing these articles feel free to shoot us an email or give our tech line a call at 1-888-365-6064.

Ordering A Rear End - The Master List of Frequently Asked Questions
  • I'm ordering a rear end, what is the difference between the different center section differential types? (article link)
  • How to measure and order a custom length rear end (article link)
  • What is the difference between Pro and Street gears? (article link)
  • Can I order a rear end with a spool and keep my ABS on my 1993-2002 F-Body Camaro & Firebird? (article link)
  • How do I know if I have 3 channel or 4 channel ABS on my 1993-2002 F-Body Camaro & Firebird? (article link)
  • Can I use 4th Gen rims with no spacers on Moser or Strange rear ends on my 1982-1992 F-Body Camaro & Firebird? (article link)
  • What rear brakes can be installed on the new rear end? (article link)
  • What gear oil should I use in my new rear end? (article link)
  • I'm ordering a Strange rear end for a 1998-2002 F-Body. Where should I send my stock brake backing plates? (article link)
  • Do you carry rear ends for applications other than what you have on your website? (article link)
  • How do I know what spline axles and center section I will need? (article link)
  • What is the difference between the 12 Bolt, Ford 9" and Dana 60 rear ends? Which should I get? (article link)
  • What rear end gear ratio should I run for my application? Gear ratio calculator (article link
  • Which wheel studs do I need for my car when ordering a rear end? (article link)
  • What's the difference between chrome & aluminum rear end covers on 12 Bolt & Dana 60 rear ends? (article link)
  • I'm ordering a rear end for a 1982-2002 F-Body Camaro Firebird, do I need the sway bar installation kit? (article link)
  • I'm ordering a rear end, what is the difference between a bare and powder coated housing? (article link)
  • What is the difference between standard and gun drilled axles? (article link)
  • I'm ordering a rear end, what is the difference between axle flanges? Standard, Star & Lightening Holes? (article link)
  • I'm ordering a Ford 9" rear end, what is the difference between a nodular iron and an aluminum center section? (article link)
  • I'm ordering a Ford 9" rear end, do I need the fill and drain bungs installed? What are they? (article link)
  • I'm ordering a Strange rear end, do I need the standard or chrome moly pinion yoke? (article link)
  • I'm ordering a rear end, does it come with the housing bushings for the rear upper control arms installed? (article link)
  • What is the difference between the M9 and a standard Ford 9" rear end housing? (article link)
  • How can I get a shipping price quote on a rear end? (article link)
  • I'm ordering a rear end, how long does it take to ship out? How does it ship? (article link)
  • I'm ordering a rear end, is there any warranty on them? (article link)
  • I'm ordering a rear end, do I need to specify no c-clips or use a c-clip eliminator? (article link)
  • Can I get an aluminum rear cover on a Strange Engineering Dana 60 rear end for a 1982-2002 GM F-Body Camaro & Firebird? (article link)

  • I'm ordering a rear end, what are the brake line, emergency brake cable and brake line clamp options? (article link

  • I'm ordering a rear end, what is the back brace option? (article link)

  • What is a full floater rear end? (article link) 
  • I have aftermarket disc brakes for my factory rear end, will they fit on an aftermarket Moser or Strange rear end? (article link)
     



Bookmark and Share

Article Details

Last Updated
5th of August, 2015

Vehicle Application
Other / Universal

Would you like to...

Print this page Print this page

Email this page Email this page

Post a comment Post a comment

Subscribe me

Add to favorites Add to favorites

Remove Highlighting Remove Highlighting

Edit this Article

Quick Edit

Export to PDF

User Opinions (8 votes)

100% thumbs up 0% thumbs down

How would you rate this answer?



Thank you for rating this answer.

Continue