Steering Box Stabilizer Brace | 1994-2002 Dodge Ram 4x2 With Stock Steering Box

Steering Box Stabilizer Brace For Stock Steering Box
1994-2002 Dodge Ram 4×2 1500, 2500 & 3500

SKU# D94-02-SB-2WD (Product Page Link)

Our steering box stabilizer brace eliminates steering wander and wobble caused by excessive shaft play in the steering box of your Dodge Ram 4×2 truck.

It eliminates frame flex at the steering box mounting point, resulting in a more positive steering feel. It’s an easy 100% bolt in installation.

It’s powder coated in your choice of bright red or gloss black for a brilliant and durable finish. It features a greasable, high quality bearing for reliable operation and comes complete with all necessary high strength mounting hardware and instructions.

Build Specifications:

  • 2.00″ x 2.00″ x .120″ wall square tubing
  • CNC laser cut and formed 1/4″ steel mounting brackets for extreme strength and great fitment
  • Precision MIG welded
  • High quality greasable block bearing
  • CNC machined 4140 chrome moly sector shaft bolt with a silver zinc finish
  • All necessary high strength mounting hardware is included
  • Powder coated in your choice of bright red or gloss black for a brilliant and durable finish

Fitment Note: This steering box stabilizer brace will only fit on 4×2 trucks that have a factory steering box installed. If you are looking for a steering box stabilizer brace for use with the aftermarket Borgeson 800120 steering box then go to our SKU# D94-02-SB-BORG-2WD product page by clicking here.

Check out all of our performance products for the 1994-1999 and the 2000-2002 Dodge Ram!


Adjustable Front Track Bar | 1994-2002 Dodge Ram 4x4 with 4"-8" Lift

Adjustable Front Track Bar
1994-2002 Dodge Ram 4×4 with 4″-8″ Lift

SKU# D94-02-TBL (Product Page Link)

Dodge Ram trucks that can’t hold a straight line are tiring to drive and just plain dangerous. The OEM front track bar on the 1994-2002 Dodge Ram 1500, 2500 and 3500 4×4 is a notorious weak link in the front suspension, often failing after only a few thousand miles.

If your lifted Dodge Ram 4×4 suffers from steering wander, poor road feel or follows the road crown aggressively, a stronger and more durable track bar assembly from Spohn Performance is what you need.

When lifted, the OEM track bar shifted your front axle to the driver’s side and made your track bar joint angle extreme. This Spohn Performance adjustable front track bar will allow you to center the front axle and have a factory joint angle on trucks with a 4″-8″ lift.

Note: If your truck is stock ride height up to a 4″ lift then use our SKU# D94-02-TB adjustable front track bar.

Build Specifications:

  • 1.25″ x .120″ wall DOM tubing
  • 4130 Chrome moly threaded tube adapters TIG welded in place
  • 3/4″ Chrome moly teflon lined extreme duty spherical rod end on the axle end
  • Greaseable Delrin bushings on the frame end
  • CNC laser cut and formed 1/4″ steel bolt in upper mounting bracket
  • Includes all required mounting hardware
  • Double adjustable for easy “on the truck” adjustments
  • Power coated in your choice of bright red or gloss black for a brilliant and durable finish

Click here to see our full selection of products for the 1994-2002 Dodge Ram.


Tubular Rear Upper Control Arms | 2009-2012 Dodge Ram 1500 4x2 & 4x4

Tubular Rear Upper Control Arms with Polyurethane Bushings

2009-2012 Dodge Ram 1500 4×2 & 4×4

SKU#: D09-1500-601 (Product Page Link)

Replace the factory’s weak and flexible rubber bushed rear upper control arms on your 2009+ Dodge Ram 1500 4×2 or 4×4 with our heavy duty tubular units! Our tubular rear upper control arms provide for serious handling performance and greatly increase the rear end’s fore and aft stability.

Eliminate wheel hop and increase traction with an easy bolt on installation. All ends are fitted with grease fittings for easy lubrication of the fluted polyurethane bushings.

Specifications:

  • 1.50″ x .120″ wall DOM tubing
  • Stronger, yet lighter than stock
  • Polyurethane bushings (fluted) with grease fittings for easy lubrication
  • Reuses OEM mounting hardware, no need to drill out your mounting brackets
  • Available powder coated in your choice of bright red or gloss black for a brilliant and durable finish

Click here to check out all of our performance suspension components for your 2009+ Dodge Ram!


Tubular Rear Lower Control Arms | 2009-2012 Dodge Ram 4x2 & 4x4

Tubular Rear Lower Control Arms with Polyurethane Bushings

2009-2012 Dodge Ram 1500 4×2 & 4×4

SKU#: D09-1500-201 (Product Page Link)

Replace the factory’s weak and flexible rubber bushed rear lower control arms on your 2009+ Dodge Ram 1500 4×2 or 4×4 with our heavy duty tubular units!

Our tubular rear lower control arms provide for serious handling performance and greatly increase the rear end’s fore and aft stability.

Eliminate wheel hop and increase traction with an easy bolt on installation. All ends are fitted with grease fittings for easy lubrication of the fluted polyurethane bushings.

Specifications:

  • 1.75″ x .120″ wall DOM tubing
  • Stronger, yet lighter than stock
  • Polyurethane bushings (fluted) with grease fittings for easy lubrication
  • Include CNC laser cut and formed E-Brake cable mounts just like the factory control arms
  • Reuses OEM mounting hardware, no need to drill out your mounting brackets
  • Available powder coated in your choice of bright red or gloss black for a brilliant and durable finish

Click here to check out all of our performance suspension components for your 2009+ Dodge Ram!


Adjustable Rear Panhard Bar | 2009-2012 Dodge Ram 4x2 & 4x4

Adjustable Rear Panhard Bar with Polyurethane Bushings

2009-2012 Dodge Ram 1500 4×2 & 4×4

SKU#: D09-1500-104 (Product Page Link)

Replace the factory’s weak and flexible rubber bushed panhard bar on your 2009+ Dodge Ram 1500 4×2 or 4×4 with our heavy duty adjustable unit!

Our adjustable panhard bar allows for centering the rear end after lowering and provides for serious handling performance. It also allows for alignment of the rear end for clearance when running larger tires and greatly increases the rear end’s lateral stability. All ends are fitted with grease fittings for easy lubrication of the fluted polyurethane bushings.

Specifications:

  • 1.00″ x .095″ wall DOM tubing
  • Stronger, yet lighter than stock
  • Polyurethane bushings (fluted) with grease fittings for easy lubrication
  • Right hand and left hand threaded silver zinc plated 4140 chrome moly double male adjuster threads into 4130 chrome moly TIG welded threaded tube adapters
  • Reuses OEM mounting hardware, no need to drill out your mounting brackets
  • This is the highest quality, easiest to adjust on the truck panhard bar on the market!
  • Available powder coated in your choice of bright red or gloss black for a brilliant and durable finish

Click here to check out all of our performance suspension components for your 2009+ Dodge Ram!