Adjustable Rear Upper Control Arms for 2000-2011 Suburban, Tahoe, Yukon, Avalanche, Escalade & H2

 Adjustable Rear Upper Control Arms with Del-Sphere Pivot Joints
2000-2011 Suburban, Tahoe, Yukon, Escalade, Avalanche & Hummer H2

SKU# GMSUV-00-06-605: 2000-2006 GM SUV (Product Page Link)
SKU# GMSUV-07-605: 2007-2011 GM SUV (Product Page Link)

Replace the factory’s fixed length rear upper control arms with our heavy duty adjustable set-up! Allows for centering the rear end after lowering and/or adjusting your pinion angle.

These are the best choice for serious off road handling. Allows for fore and aft alignment of the rear end for clearance when running larger tires and greatly increases the rear end’s stability. The Del-Sphere pivot joints provide for 28 degrees of articulation, perfect for the off road enthusiast looking for maximum suspension articulation!

Build Specifications:

  • 1.25″ x .120″ wall DOM tubing
  • Stronger, yet lighter than stock
  • 3/4″ Del-Sphere Pivot Joints on both ends for full suspension articulation
  • CNC machined through sleeve and zinc plated steel spacers keep the Del-Sphere ends perfectly centered inside of the vehicle mounting bracket
  • Right hand and left hand threaded male/female CNC machined 4140 chrome moly adjuster allows for easy on-truck adjustment
  • Ships to you jig set at OEM length
  • TIG welded 4130N chrome moly threaded tube adapters
  • Re-uses OEM mounting hardware, no need to drill out your truck’s mounting bracket holes
  • Available powder coated in your choice of bright red or gloss black for a brilliant and durable finish
Rear Suspension Arms 2000-2011 Suburban, Tahoe, Yukon, Avalanche, Escalade, H2
See our complete line of performance suspension components for the 2000-2006 and 2007+ Suburban, Tahoe, Yukon, Escalade, Avalanche and Hummer H2 SUVs.

1961-1964 Oldsmobile Dynamic 88, Jetstar 88 & Super 88 Rear Upper & Lower Control Arms
Tubular Rear Upper & Lower Control Arms
1961-1964 Oldsmobile | Dynamic 88, Jetstar 88 & Super 88

If you’re looking to improve the rear suspension on your 1961-1964 Oldsmobile Dynamic 88, Jetstar 88 or Super 88, Spohn Performance has the answer. Our new tubular rear lower control arms and adjustable rear upper control arms will restore your ride and improve your suspension performance.

They feature super strong tubular DOM construction with fluted and greaseable polyurethane bushings. The rear upper control arms are adjustable so you can easily dial in your pinion angle. We even offer new mounting hardware to complete the installation.

Hop on over to the product pages linked below to check out the full specifications and look at some more product pictures:

Tubular Rear Lower Control Arms – 1961-1964 Full Size Oldsmobile “88”

Adjustable Rear Upper Control Arms – 1961-1964 Full Size Oldsmobile “88”

1961-1964 Oldsmobile Dynamic 88, Jetstar 88 & Super 88 Rear Upper & Lower Control Arms Installed.


Steering Box Stabilizer Brace for 1994-2002 Dodge Ram 4x4 with Borgeson 800112 Steering Box

Steering Box Stabilizer Brace
1994-2002 Dodge Ram 4×4 with Borgeson 800112 or 800120 Steering Box

SKU# D94-02-SB-BORG (Product Page Link)

Our steering box stabilizer brace eliminates steering wander and wobble caused by excessive shaft play in the steering box of your Dodge Ram 4×4 truck. It eliminates frame flex at the steering box mounting point, resulting in a more positive steering feel. It’s an easy 100% bolt in installation.

It’s powder coated in your choice of bright red or gloss black for a brilliant and durable finish. It features a greasable, high quality bearing for reliable operation and comes complete with all necessary high strength mounting hardware and instructions.

Build Specifications:

  • 2.00″ x 2.00″ x .120″ square tubing
  • CNC laser cut 1/4″ steel mounting brackets for extreme strength and great fitment
  • Precision MIG welded
  • High quality greasable block bearing
  • CNC machined 4140 chrome moly sector shaft bolt with a silver zinc finish
  • All necessary high strength mounting hardware is included
  • Easy 100% bolt in installation
  • Powder coated in your choice of bright red or gloss black for a brilliant and durable finish

Fitment Note: This steering box stabilizer brace will only fit on trucks that have the aftermarket Borgeson 800112 or 800120 steering box installed. If you are looking for a steering box stabilizer brace for use with the factory steering box then go to our SKU# D94-02-SB product page by clicking here.

Steering Box Stabilizer Brace for the 1994-2002 Dodge Ram 4×4 with Borgeson 800112 Steering Box Installed

View all of our performance parts for the 1994-1999 and 2000-2002 Dodge Ram 4×4 trucks.
.


Borgeson 800120 Steering Box for 1994-2002 Dodge Ram

 

Borgeson 800120 Power Steering Box | 1994-2002 Dodge Ram 4×4 & 4×2

SKU# A-BRG-800120 (Product Page Link)

The Borgeson 800120 replacement power steering box is for the 1994-2001 Dodge Ram 1500 and the 1994-2002 2500 and 3500 4×2 and 4×4 trucks. Borgeson has acquired a modern Delphi integral power steering gear box to replace the early 1960’s Saginaw technology that was used in the 1994-2002 Dodge Ram truck’s factory installed steering box.

This new Borgeson 800120 steering box provides modern day technology to address the well known poor steering characteristics of the 1994-2002 Dodge Ram. The Borgeson 800120 power steering box is a substantial upgrade to the OEM Dodge steering box because it has a 17mm DD input shaft. This is a substantial upgrade from the stock box which has a 3/4″-30 spline input shaft with an orientation flat on it. Borgeson supplies their steering box with an adapter to go from 17mm DD to 3/4″-30 male.

Advantages of the Borgeson 800120 Dodge Ram Replacement Power Steering Box:

  • This is a brand new upgraded Delphi steering box (not a rebuild)
  • The 800120 replacement steering box is covered by a 3 year (unlimited mileage) warranty
  • Modern internal valving provides a variable assist feel to the driver’s steering input. The further you turn the wheel the greater the assist. The benefits to you: the power assist is limited in the centered position to help the vehicle track straight on the highway
  • Larger internal piston diameter (80mm) for greater power assist
  • The Borgeson 800120 steering box is a 13:1 ratio. The OEM steering box is a 16:1 ratio. The benefit to you: effectively 3.5 turns from lock-to-lock compared to 4.5 turns with the original steering box providing for easier parking and maneuvering
  • Bolts directly to the stock mounting location, uses the original Pitman arm and even works with your stock hoses and pump
  • Larger diameter bearings support the output Pitman shaft
  • The Borgeson box and shaft are a full-circle spline design
  • Includes an adapter to work with all Borgeson replacement steering shafts
  • Installs in 60 minutes and your truck will be back on the road with vastly improved handling characteristics
  • 100% MADE IN THE USA!

Steering Shaft Fitment: For an easy 100% bolt in installation a Borgeson steering shaft assembly is highly recommended for installation of this steering box. Pick your vehicle year in the option box on the product page to add the appropriate Borgeson steering shaft assembly to your order.

To use this steering box with your truck’s OEM steering shaft (a female, D-shaped spline design), the Borgeson steering box’s input shaft (male, O-shaped) will have to be cut down with a grinding wheel.

Steering Box Stabilizer Brace: Contrary to information being presented by others, ANY brand steering box stabilizer brace that is made to work with the factory steering box will NOT properly fit the Borgeson 800112 steering box without some (major) modifications. This is why we have developed a steering box stabilizer brace that is made specifically for use with the Borgeson 800112 steering box.

If you’d like to install a steering box stabilizer brace with the Borgeson 800112 steering box (which we highly recommend), then use our SKU# D94-02-SB-BORG steering box stabilizer brace (fits 4×4 trucks only).

View all of our performance parts for the 1994-1999 and 2000-2002 Dodge Ram trucks.


Dodge Ram 4x4 Front Control Arms Mounting Hardware Bolt Kits

Front Control Arms Mounting Hardware Kits | 1994-2011 Dodge Ram 4×4

If you’re removing or replacing your front upper or lower control arms on your 1994-2011 Dodge Ram 4×4 truck, why not replace the original mounting hardware with one of our new Grade 10.9 mounting hardware kits?

Our front control arm mounting hardware kits for the 1994-2011 Dodge Ram 4×4 trucks include Grade 10.9 bolts, flat washers and flanged “Top Lock” nuts.

We have front control arms mounting hardware kits available for the following applications:

SKU# D94-99-980: Front upper control arms mounting hardware kit for the 1994-1999 Dodge Ram 4×4 1500, 2500 & 3500 (product link)

SKU# D94-99-981: Front lower control arms mounting hardware kit for the 1994-1999 Dodge Ram 4×4 1500, 2500 & 3500 (product link)

SKU# D00-980: Front upper control arms mounting hardware kit for the 2000-2001 Dodge Ram 4×4 1500 and 2000-2011 Dodge Ram 4×4 2500 & 3500 (product link)

SKU# D00-981: Front lower control arms mounting hardware kit for the 2000-2001 Dodge Ram 4×4 1500 and 2000-2011 Dodge Ram 4×4 2500 & 3500 (product link)
.