New Rear Upper Control Arm for the 2011-2012 Ford Mustang

Posted by Spohn Performance | 05/11/11 | Tagged 2. New Products

2011 Mustang Rear Upper Control Arm
Rear Upper Control Arm for the 2011-2012 Ford Mustang

Starting with the 2011 model year Ford made some design changes to the rear upper control arm as compared to the previous 2005-2010 Ford Mustang. Spohn Performance now has the rear upper control arm for the 2011+ Ford Mustang in two versions, click the links below to check them out!

SKU# M5-603-11: Adjustable Rear Upper Control Arm with Spherical Rod End for the 2011-2012 Ford Mustang (Product Link)

SKU# M5-605-11: Adjustable Rear Upper Control Arm with Del-Sphere Pivot Joint for the 2011-2012 Ford Mustang (Product Link)

Our adjustable rear upper control arm for the 2011-2012 Ford Mustang outperforms the flexible, stamped-steel arm and soft rubber bushing that comes from the factory. Eliminate wheelhop, improve handling, and increase traction with an easy bolt on installation. Adjustability feature allows for setting the pinion angle. Our right hand and left hand threaded CNC machined double adjuster allows for easy on-car adjustments, no need to unmount the control arm to make adjustments!

.


Front End Steering Rebuild Kit 1973-1977 A-Body Chevelle Monte Carlo Malibu
Precision Front End Steering Rebuild Kit for the 1973-1977 A-Body Chevelle, Monte Carlo, Malibu, etc.

SKU# E-FRTKIT-A7377 (Product Page Link)

Spohn Performance is known for quality parts, our front end rebuild kit for the 1973-1977 A-Body cars is no exception. This kit includes everything you need to make your front end better then it was the day it rolled off the assembly line!

Our front end rebuild kit includes:

  • Precision Centerlink
  • Precision Idler Arm
  • Precision Inner Tie Rod Ends (Qty. 2)
  • Precision Outer Tie Rod Ends (Qty. 2)
  • Precision Tie Rod Adjusters (Qty. 2)

View all of Spohn Performance’s products for the 1973-1977 GM A-Body: Chevelle, Monte Carlo, Malibu, etc. by clicking here.
.


Dodge Ram Front Control Arms
New Front Control Arms For Lifted 1994-2011 Dodge Ram 4×4 Trucks

Spohn Performance now has front upper and lower suspension control arms available for 1994-2011 Dodge Ram 4×4 trucks with a lift kit that need front control arms that are longer than stock to maintain proper front axle alignment.

The Spohn Performance boxed front control arms for the 1994-2011 Dodge Ram 4×4 outperform the flexible, stamped steel control arms and soft rubber bushings that come from the factory. Eliminate wheel hop, steering wander and increase traction with an easy bolt on installation. All ends are fitted with grease fittings for easy lubrication of the fluted polyurethane bushings. Available powder coated in your choice of bright red or gloss black for an attractive and durable finish.

Our boxed front control arms are constructed from 2.00″ x 1.50″ x .120″ wall rectangular mild steel tubing, and are 100% TIG welded for the ultimate in strength and appearance. The front lower control arms are built with an offset to provide maximum tire clearance. When running larger tires they can rub against the stock control arms at full steering lock, our offset design eliminates this problem!

To see our 1994-2011 Dodge Ram 4×4 suspension components click on the link for your year truck: 1994-1999 Dodge Ram 4×4 Suspension, 2000-2002 Dodge Ram 4×4 Suspension, 2003-2011 Dodge Ram 4×4 Suspension.


2005-2011 Mustang Rear Lower Control Arm Relocation Brackets
2005-2011 Ford Mustang Rear Lower Control Arm Relocation Brackets

SKU# M5-210 (Product Page Link)

Our rear lower control arm relocation brackets for the S197 2005+ Ford Mustang reposition your instant center by lowering your rear lower control arm angle for increased traction and anti-squat. They have four (4) mounting positions available that lower the rear of the control arm up to 4″. The S197 cars are notorious for massive wheel hop and these rear lower control arm relocation brackets coupled with a set of good rear lower control arms are the cure!

Lowered Vehicles: This product is a must for lowered vehicles to correct your suspension geometry. Lowering your vehicle alters the control arm angle putting the rear of the control arm higher than the front, this causes massive wheel hop, traction loss and bad handling.

Non-Lowered Vehicles: Stock ride height cars will see a dramatic increase in traction by lowering the rearward angle of the control arm with our relocation brackets. The four lowered mounting holes are placed in the arc pattern of the OEM length control arm, this allows a non-lowered Mustang to drop the rear control arm angle and not require a longer than OEM (or adjustable) control arm as all geometry is correctly maintained. The anti-squat performance is providing most users with a full .10 or better 60′ reduction!

Our relocation brackets are CNC laser cut and formed from 3/16″ steel using state-of-the-art CAD/CAM technology for precision tolerances. They are an easy 100% bolt in installation and all mounting hardware is included. They come with a brilliant and durable powder coated finish in your choice of bright red or gloss black.


Dodge Ram 4x4 Steering Box Stabilizer Brace

1994-2001 Dodge Ram 1500 4×4 | 1994-2002 Dodge Ram 2500 & 3500 4×4

SKU# D94-02-SB (Product Page Link)

Our steering box stabilizer brace eliminates steering wander and wobble caused by excessive shaft play in the steering box of your Dodge Ram 4×4 truck. It eliminates frame flex at the steering box mounting point, resulting in a more positive steering feel. It’s an easy 100% bolt in installation.

It’s powder coated in your choice of bright red or gloss black for a brilliant and durable finish. It features a greasable, high quality bearing for reliable operation and comes complete with all necessary high strength mounting hardware and instructions.

Build Specifications:

  • 2.00″ x 2.00″ x .120″ square tubing
  • CNC laser cut 1/4″ steel mounting brackets for extreme strength and great fitment
  • Precision MIG welded
  • High quality greasable block bearing
  • CNC machined 4140 chrome moly sector shaft bolt with a silver zinc finish
  • All necessary high strength mounting hardware is included

Dodge Ram 4x4 Steering Box Stabilizer Brace Installed