Moser Engineering - M9 Full Floater Drag Race Rear End - Complete
If you have questions regarding rear ends and their options read the "Ordering A Rear End - The Master FAQ List" article in our Support Center.
Moser Engineering's M9 full floater drag race rear end is designed to be the best in class
when a full floater rear end is required (What is a full floater rear end?). The extremely high strength chrome moly rear end housing is perfect for Pro-Mod, Top Dragster, Top Sportsman and any
other class where a racer wants the safety and strength that a full floater rear end affords.
Moser Engineering uses its premium 40 spline axle shafts along with Moser Engineering
designed 40 spline aluminum hubs and 4130 chrome moly drive flanges. The hub assemblies can be built to accomodate a standard 5 x 5" bolt circle or a 5 x 4.75" bolt
circle. Combined with Moser Engineering's various choices of 40 spline spools and 9" or 9.5" competition center sections, it's a bullet-proof set
The Moser Engineering M9 full floater drag race rear end housing is made from 1/8" thick CNC
laser cut and formed 4130 chrome moly that is formed from one triangulated piece. It uses oversized 3.50" o.d. x .250" wall 4130 chrome moly axle tubes for increased
strength. With a 3/8" thick 4130 chrome moly face plate combined with internal bulkheads and gusseted reinforcements this housing is made to take on the toughest
Drain and fill plugs, brake rotors, dual caliper brake brackets, bearings, seals and spindles are all standard. Optional four link suspension brackets and back brace can be installed to complete the package. Wilwood Dynalite forged four piston brake calipers are offered to finalize the rear end, or you can install your own. You can use one brake caliper per end or you can run two brake calipers per end for maximum braking power (uses a .380" thick brake rotor).
Don't settle for a weak rear end - upgrade to the best!
Overall Length: Look at the second picture
listed to see the dimensions we need to know for the length of the rear end and then fill them in to the corresponding option boxes.
Full floater chrome moly M9 rear end housing
- Bare housing or with 4 link suspension brackets and back brace installed
Completely assembled thru-bolt aluminum center section
- 40 spline spool (Steel, Pro-Steel or Aluminum)
- Pro competiton gears (9" or 9.5")
Pro 10 hole aluminum pinion support
40 spline axles, 40 spline aluminum hubs and 4130 chrome moly drive
- High strength 5/8" wheel studs
- Fill and drain bungs installed
- Bearings, seals, spindles, brake rotors and dual caliper brake brackets
Optional Wilwood brake calipers and pads or install your own
- Available in bare metal or powder coated
The M9 full floater drag race rear end is available
with many options, please select the components you wish to have your rear built with from the drop down option boxes. If you have any questions on the best set up for
your application, email our tech department for assistance in making the right
Shipping: The M9 full floater drag race rear end ships via UPS Ground.