Moser Engineering - M9 - Housing Only - No Housing Ends - Mild Steel - Universal Custom Builders
Application: Universal - Bare Rear End Housing For Custom Build - Mild Steel - No Housing Ends
If you have questions regarding rear ends and their options read the "Ordering A Rear End - The Master FAQ List" article in our Support Center.
Moser Engineering M9 Bare Housing: If you're looking for just the M9 housing then this is the package for you!
This is the M9 rear end housing only. This M9 rear end housing does not include housing ends and is available in 48" or 60" overall lengths. The Moser Engineering M9 bare housings are made to not only withstand the demands of high horsepower applications, but also finish off the back half of any show vehicle with style.
The Moser M9 rears are made from 1/8" thick CNC laser cut mild steel, which is fabricated from one triangulated piece of metal. Combine that with a 3/8" thick face plate, and standard internal gussets and bulk heads and the M9 rear end is ready to take on the toughest racing conditions. Also included are custom machined fill and drain vents.
This is a "Bare" rear end housing, meaning there are no suspension mounting brackets
installed. Use this rear end housing for custom applications where you will be custom building your suspension or adapting this rear end to a vehicle that does not
have a bolt in ready rear end available. It comes in two universal overall lengths, 48" or 60". Shorten the housing to your desired length and install your own housing
- Uses 3.00" x .250" thick DOM axle tubing
- Available in 48" or 60" overall lengths
- Made from 1/8" thick CNC laser cut and formed mild steel
The M9 rear end housing is available with many options, please select the components you wish to have your rear end built with from the drop down option boxes. If you have any questions on the best set up for your application, email our tech department for assistance in making the right choices.
Shipping: The Moser M9 rear end housing ships via UPS Ground.