Offset Rod End Spacers - Spohn LCAs

Spherical rod end CNC machined through sleeve and offset CNC machined spacers. 

This kit includes one (optional) CNC machined rod end through sleeve and two CNC machined offset rod end spacers. This is the rod end offset spacer set-up to do ONE rod end, enter the quantity needed for the number of rod ends you need to do.

Replacement rod end spacers set-up for:

• Part #203-OS rear lower control arms (1982-2002 GM F-Body)
• Part #213-OS rear lower control arms (1978-1987 GM G-Body)
• Part #223-OS rear lower control arms (1964-1972 GM A-Body)

If you need the rod end also - click here for LH thread, click here for RH thread.

Application Notes: If you have Spohn Part #203, 213 or 223 spherical rod ended rear lower control arms with standard centered spacers and want to convert to the offset set-up then you will only need to choose "spacers only" in the option box, you can re-use your existing through sleeve. If you have lower control arms with just rod ends then you will need the spacers and the through sleeve. If you are buying these to convert LCAs that are not from Spohn Performance you will need to make sure your LCAs have 3/4" rod ends. Our offset spacer/sleeve set-up is designed for use on a 3/4" bore rod end with a 0.875" ball width.